ORDER ONLINE 24/7
BY PHONE 07858 294815
BY EMAIL firstname.lastname@example.org
COLLECT Thurs-Sun 8:30am-1:00pm
or BY APPOINTMENT
A beautiful book for both beginner...
The FastFerment System allows primary and secondary fermentation in the same unit. AVAILABLE FOR PRE-ORDER. Please allow 3-21 days for delivery.
White 5 gallon top tap King Keg barrel with 8 gram pin valve Gas injection cap. In addition you will need a bulb holder and a pack of soda syphon bulbs (sold separately) to use this barrel as fully functioning pressurised gas injection barrel.
White 5 gallon top tap King Keg barrel with gas injector steel valve for full S30 CO2 Gas injection. S30 Gas Cylinder sold seperately and refills available.
White 5 gallon bottom tap King Keg barrel with gas injector steel valve for full S30 CO2 Gas injection S30 Gas Cylinder sold seperately and refills available.
White 5 gallon bottom tap King Keg barrel with gas injector steel pin valve for 8 gram CO2 Bulbs (sparklet or sodastream style) (bulb holder and CO2 bulbs sold separately).
A complete kit - White 5 gallon barrel with gas injector steel pin valve for 8 gram CO2 Bulb, a red bulb holder and a pack of 10x8 gram bulbs to get you started.
Metal stand for FastFerment Conical Fermenter.
Insulated jacket for use with The Grainfather.
White 5 gallon barrel with basic 2 inch vent cap.
Hambleton Bard Gas Cylinder filled with natural CO2. For use with an S30 valve - will not fit a pin valve system.
2 Gallon (10L) Basic Beer Barrel with 2 inch vent cap. Holds approximately 18 pints.
IMPORTANT:Hambleton Bard S20 CO2 Gas Cylinders are being DISCONTINUED and will no longer be sold, replaced or credited from 5th December 2016.
A 2 inch beer barrel cap with steel 8 grm pin valve to convert a standard barrel to a pressurised one.*** Please note that due to current postal restrictions we are no longer able to send items containing CO2 via Royal Mail and so the delivery charge now reflects delivery via a courier licensed to transport gas cylinders***
This is a 4 inch black beer barrel cap with combined gas inlet and pressure release valve and O ring.
This is a 4 inch black beer barrel cap with combined gas inlet and pressure release valve and O ring. Inlet valve is for an S30 or S20 gas cylinder (not pin valve/soda syphon bulbs). For use with King Keg.
Weltonhurst 2 inch cap with a pin valve to accept the 8 gram/soda syphon bulbs. This valve will fit the basic white 5 gallon beer barrel with 2 inch cap and will convert your barrel into a pressurised system.
Weltonhurst 2 inch cap with an S30 valve to accept a super S30 cylinder. This valve will fit the basic 5 gallon beer barrel with 2 inch cap.
A replacement pin valve for a standard beer barrel. Will fit either a 2 or 4" cap. Note - cannot be used with an S30 cylinder - and requires a red plastic bulb holder for use with the 8 gram bulbs.
A replacement S30 inlet valve for a 4 inch beer barrel cap.
Hambleton Bard Gas Cylinder refill filled with natural CO2. Refills are available on return of the gas cannister. For use with an S30 valve - will not fit a pin valve system. Refills can only be sent out upon receipt of an empty Hambledon Bard S30 cannister.
A pack of PH test strips ranging from 3.8 - 5.5. Suitable for testing beer and cider. Approximately 20 strips
Alla Triple scale Wine and Beer hydrometer and clear plastic trial jar.Coloured bands indicate where to start and finish wines and beers, and there is an indication for sweet/medium/dry finished wines. Including a clear plastic trial jar with black stand and full instructions for use.
For use with 4 inch capped top tapped beer barrels. As beer clears from the top down, allows beer to be drawn off the top early for those who can't wait!
Co2 bulbs are used to add additional carbon dioxide gas to pressure beer barrels. Use with 8grm steel pin injector valve and bulb holder. Also suitable for making soda water, and for use in paintball-type air guns.*** Please note that it is not permitted to send these bulbs via Royal Mail and so the delivery charge reflects delivery via a courier...